that's not a problem I had a spare PoE injector to reuse. I bought a few of the Cisco 7940 VoIP handsets from ebay, they were only £10 each but didn't include power etc - they're PoE. (If you want to make external calls you will have to get a SIP trunk from a provider, but you can test 0800 numbers using the bundled STAR Communications Trunk that comes with the install) If you're just after a simple system, with the VoIP client running on your PC/Laptop/Phone then you're pretty much done. I tested this basic setup using Zoiper for Android and IOS and it didn't take long at all to make some test calls between these soft-phones. I used the website for my base FreePBX/Asterisk install - it covers everything I needed from a basic VoIP solution. Then I managed to hit nearly every hurdle possible. Up until I introduced the Cisco VoIP phones it was - Soft phones worked nicely. I initially thought this was going to be a simple project. (They are crazy handy to have around, I find myself using them all the time when odd problems arise.) Note: I have a "few" Raspberry Pis around the house, most in use, some just "there". (Voice over Internet Protocol - Phone calls via your computer/network.)Īfter doing a little research I decided the easiest thing was to do was grab a spare Raspberry Pi and find some VoIP phones to test with. I've had the need to have a little experiment with VoIP phones recently.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |